Good Quality, Energy

Overview

Basic Info.

Model NO.	XZG-14
Material Status	Powder, Solution, Cream, Strap, Bulk
Drying Medium	Superheated Steam, Air
Operation Pressure	Atmospheric Pressure
Treatment Windcpacity(M/H)	14000-27000
Floor Space(mm2)	5250X4250
Evaporated Moisture(Kg/H)	200-1600
Main Machine Dimensions(mm)	1500×5400
Main Machine Power(Kw)	60-105
Barrel Diameter(mm)	1400
Transport Package	Seaworth
Specification	Customizable
Trademark	stdrying
Origin	Jiangsu Changzhou
HS Code	8479899990
Production Capacity	5 Sets/Month

Product Description

Product DescriptionDescription
XZG series flash roating dryer is developed by our factory, and its, techinology is based on advanced technology aborad. the machine includes many superioity, such as reasonable design, compact struction, wide utilization, great productive capacity, good quality, high effect andenergy-saving. Drying, grinding and sieve are completed in one euqipment in once time, it eliminates pollution and the technology reachs internationa 80, advanced level.
Principle of work
Hot air enters into stirring and crushing and drying chamber from the bottom of dryer with suitable atomizing speed. It exerts strong shearing, blowing, floating and rotating effect to raw material. Therefore raw material is granulated through centrifuge, shearing, impacting and friction effect. It strengthens the process of geat exchange under the action of stirer and the granule that is small in partical and contain less moisture will lift accompainied with revolving air stream. During the period of lift, it is dried further. Because gas and solid two phase flow in rotating and the intertia of solid phase is more than that of gas and the relative velocity between solid and gas phase is large, so it strengthens the process of heat exchange Therefore the machine has strong drying capacity.
features
1.There are many kinds of feding equipment for choosing, Feeding is continous and static.2.At the bottom of dryer, where is high temperature area, heat-sensitive raw material can not contact with heat surface directly, therefore it solves the degenerative problems of heat sensitivity raw material.3.There are air pressure equipment and shaft equipment, so that increasing life of machine.4.There is special equipment for dispersing wind, and raising the amount of hot air.5.Compared with other drying methods. the specific gravity of raw materials can be effectively raised.6. Because gas speed at circle inside the drying chamber is high and the staying time of raw material is short.7.It is possible for small equipment to carry out large-scale production. prevent material adnering and heat-sensitiv material degenerate effectively.
Product Parameters

model	barrel diameter(mm)	main machinedimensions(mm)	main machine power(kw)	treatment windcpacity(m/h)	evaporated moisture(kg/h)	floor space(mm2)
XZG-2	200	250×2800	5-9	300-800	10-20	3500x2500
XZG-3	300	400×3300	8-15	600-1500	20-50	3800x2700
XZG-4	400	500×3500	10-17.5	1250-2500	25-70	4000x3000
XZG-6	600	700×4200	20-29	2500-5000	40-200	4250x3250
XZG-8	800	90×4600	24-35	3000-8000	60-600	4500x3500
XZG-10	1000	1100×5000	40-62	5000-12500	100-1000	4750x3750
XZG-12	1200	1300×5200	50-89	10000-20000	150-1300	5000x4000
XZG-14	1400	1500×5400	60-105	14000-27000	200-1600	5250X4250
XZG-16	1600	1700x6000	70-105	18700-36000	250-2000	5500x4500
XZG-18	1800	1960×8000	85-120	19500-42000	300-3000	8000x7000

Company Profile

Enterprise Spirit: Management, the soul; people, the foundation;Enterprise culture: Diligence rewarded by God, honesty rewarded in business. and perfection rewarded in professionalism;Enterprise policy: Good quality for surviving and development;Enterprise Characteristic: people-oriented in guidance; common efforts in action.Jiangsu Shuntong Drying Technology Co., Ltd. is located in Changzhou City, Jiangsu Province, a famous industrial city. It is a professional enterprise specializing in equipment design, manufacturing, sales and industrial heat energy research. It is currently a professional and systematic enterprise in the production of drying equipment in China. China's drying technology industry enjoys a high reputation.The company has complete production equipment, including 50 sets of various processing equipment. In order to improve product quality, the company uses CNC flame cutting machines, and has industry-specific equipment such as folding machines, shearing machines, plate rolling machines, and resistance welding machines. The metal cutting machine tool in the metal processing workshop is fully equipped with planing, milling, drilling and so on. The company's equipment operators are skilled workers with rich experience. The company has sufficient raw materials, complete hardware warehouse accessories, and the annual production capacity of various drying equipment exceeds hundreds of sets.The company pays attention to technology research and development, and the technical directors are experienced senior engineers with 20 years of experience in drying equipment design and production. The company has a number of patents. (Closed circulation boiling drying unit, closed circulation spray drying unit, waste heat recovery heat exchanger, low temperature belt drying unit) The company adopts the advanced management concept of combining China's national conditions and the actual development of the enterprise, and constantly attracts high-quality, high-level employees. The joining of management and technical talents has rapidly improved the competitiveness of the company, established an ISO9001 international quality certification system, and a complete set of advanced product research and development, processing and testing equipment, and cultivated a group of dedicated and strong service teams. Years of hard work, the company has accumulated a wealth of pharmaceutical, chemical, food and other drying equipment design, manufacturing experience, the products are widely used in various industries.The company always adheres to the business philosophy of people-oriented and honesty first, attaches great importance to the introduction and cultivation of talents, pays close attention to technological innovation, strictly grasps quality management and continuously strengthens the professional construction of enterprises to stand out in the fierce market competition.We adhere to the style of following people's hearts and working together to act together. We sincerely welcome friends from all walks of life to visit us for guidance, professional exchanges, and technology seminars. We will provide you with the best quality products and thoughtful services. Let us work together to create brilliant!

Certifications
Our Advantages

FACTORY PRICEWhile grasping the quality, our price is also the most affordable, to achieve good quality and low price.GOOD SERVICEAccording to the actual needs, our manufacturers improve the product packaging, so that the packaging can better reflect the product grade or brand sense.PROFESSIONAL TEAMOur products have quality margin in quality, so that customers can trust our quality.

Exhibition

Packaging & Shipping

PACKAGE:Standard export carton packing.DELIVERY TIME:3-20 days after confirming order,detail delivery date should be decided according to production season and order quantity.

FAQ

Q1:Equipment Payment MethodA1:40% advance payment.The remaining 60% is paid upon delivery.Q2:Equipment production cycleA2:The production cycle of small equipment is 10-15 working days. The production cycle of medium-sized equipment is 20-30 working days. The production cycle of large equipment is 35-50 working days. The equipment is non-standard equipment, and the specific production time is determined according to the model of the equipment.Q3:Equipment Quality Warranty PeriodA3:Free replacement of equipment accessories within one year after the equipment leaves the factory (except for human reasons),life-long maintenance, and free online guidance in remote areas.Q4:If the equipment is too large, it will affect the sea transportation, or will it not fit into the container?A4:Our engineers design splicing equipment according to the size of the container, and complete each part of the equipment before transportation. After all the equipment components are transported to the buyer's factory, our company will send people to the site to guide the installation, or deliver the equipment installation drawings to the buyer for assembly.Q5:Regarding the transportation of equipment.A5:Our company does not limit what method the buyer uses (buyer looking for boats/seller looking for boats). The purpose is to reduce the transportation cost to a minimum.Q6:Proof of seller strengthA6:Our company has a complete ISO9001 system. CE and AAA certificates, the produced equipment complies with GMP standards.There are also hundreds of sets of processing equipment.The company's overall employees exceed 50 people.